Motorized Constant Loader CLE-150 Series

Most suitable for hardness measuring confirmed to JIS K 6253:2006 Stable descent speed control with motor driving system Available for optional speed setting from minimum 0.1mm/sec.

When we measure the hardness of rubber test specimen etc. with durometer, we have the possibility to make an error for the result of the measurement. To make solution for such an important factor fo the error, CLE-150 Series is employed the motor driving system for the descent speed control, and then we could realize to measure the hardness of constant speed and constant pressure that is precise and reproducible.

Features

Measuring pressure

Measuring pressure is kept always constantly with static load by a weight. By a replacement of weight and flexible joint, it can be comply with necessary measuring pressure (1000g・5000g・500g) for each models of durometer.

Descent speed

Possible to set optional descent speed with stepping motor from 0.1 to 19.9mm/s.

Flexible joint system

The flexible joint system enables firm contact of the pressure foot with the surface of the test piece.

Specifications

Load Stand dimension (mm): 163.2W×244D×389H
Table dimension (mm): 150W×140D
Depth from measuring point (mm): 70
Weight (kg): 13

Outer dimensions (mm)

Optional accessories

Durometer
Fitting Adapter

Joints

Weights

Configuration of each model

Object	CLE-150L	CLE-150H	CLE-150M	CLE-150U	CLE-150SL
ASKER durometer	A・C・E JA・B etc	D・CS・JC etc	A・C・E・JA・B D・CS・JC etc	A・C・E・C₂ CSC₂・JA etc	C₂・CSC₂ etc
Measuring load	1000g	5000g	1000g・ 5000g	500g・ 1000g	500g
Component